About the GD50 PC Dripline KitThe dig drip irrigation kit GD50 PC Dripline Kit converts a 1/2″ sprinkler riser into an efficient drip irrigation system. Designed for up to 150 sq ft, it can be extended to 600′ with additional PC dripline. The kit features pressure-compensating, self-cleaning drippers to ensure consistent flow across the line, reducing water waste and promoting plant health.Detailed Installation StepsAssess Areas: Determine areas best suited for drip irrigation, such as shrubs, trees, or narrow planting zones.Prepare Riser: Remove sprinkler heads and cap unused risers. Flush the riser, then attach the conversion elbow adapter, pressure regulator, and swivel adapter.Connect Dripline: Attach the dripline to the swivel adapter and secure with tubing holder stakes.Flush and Test: Turn on the water to flush the system, then cap the end of the line and pressure-test for leaks.Adjust Coverage: Ensure the dripline provides adequate coverage and reposition if necessary.By following these steps, you can easily set up and customize your DIG GD50 PC Dripline Watering Kit for efficient, effective irrigation.SpecificationsMaximum Incoming Operating Pressure: 100 PSIOperating Pressure Range: 10-45 PSIDripper Flow Rate: 1 GPHAverage Flow Rate: 0.56 GPM (33.3 GPH)Inline Drippers per 50′: 33Preset Pressure: 25 PSIMaximum Extension: Up to 600′ with additional PC dripline of the same spacing and flow rateWatering InstructionsFrequency: Open the system valve for 45 minutes to 1 hour every 2-3 days, depending on local conditions. Lighter soils need more frequent watering than heavier soils.Adjustment: Check soil and plant health after 1-2 weeks and adjust the watering schedule as needed. Use an irrigation controller to modify the watering duration and frequency if required.Easy Installation of our DIG GD50 PC Dripline Watering Kit – Pack of 3Kit Contents: Includes 50′ of dripline with 1 GPH PC drippers every 18″, and all necessary components for a complete installation.Application Areas: Ideal for narrow plantings, roses, flowerbeds, and groundcover. Connects to a 1/2″ sprinkler riser or faucet. dig drip irrigation kitWhat’s Included(1) 3/4″ MHT x 1/2″ FPT Riser Adapter (Model # Q59)(1) 3/4″ FHT x MHT 25 PSI Pressure Regulator (Model # D46)(1) 3/4″ FHT Swivel Adapter with 60-Mesh Screen Washer (Model # C34)(1) 50′ of 1/2″ Dripline with 1 GPH PC Drippers Every 18″ (Available in 100′, Model # B18100)(5) Tubing Holder Stakes (Pack of 10, Model # R64B)(1) 1/2″ Hose End Cap (Model # Q58)(1) Instruction ManualFeatures of dig drip irrigation kitComplete Coverage: So, each kit covers up to 150 sq ft and can be expanded up to 600 sq ft.Efficient Watering: Delivers water directly to plant roots, reducing evaporation and wind loss.Healthy Growth: Maintains optimal soil moisture, promoting healthy plant growth and minimizing soil erosion and runoff.Versatile Use: Suitable for use around building foundations and can be covered with mulch.
